Weatherstripping

What to look for... Weatherstripping is specifically designed to fill factory gaps and seams, separate parts, and eliminate air noise and water leaks. When reassembling your car, care must be taken not to eliminate these gaps. An assembly and shop manual will be very valuable explaining how to adjust your doors, glass and fenders to the proper specifications.

• When you replace your old rubber with new SoffSeal weatherstripping be sure to check the door’s hinge pins. This is critical in aligning your doors.

• If you open your door and it drops, the hinge pins are worn and should be replaced to align the door properly.

• Also, if you didn’t buy your car new, several adjustments may have already been made. You may also need to make adjustments to your windows.

• Check your assembly manual, call your local dealer or call SoffSeal direct for technical assistance, or attend a SoffSeal Attention to Detail™ seminar.

• To be sure you’re getting the highest quality weatherstripping ask for SoffSeal by name, and look for the genuine SoffSeal packaging.

• SoffSeal’s weatherstripping has correct, machine installed, white clips that will line up properly with the factory holes.

• SoffSeal’s ends are molded to the extrusion, not glued or bonded. Glued or bonded ends pull apart. SoffSeal is your assurance of quality, fit, and looks.

• SoffSeal weatherstripping has the correct amount of mounting pins to attach your new weatherstripping. Another sign of SoffSeal’s Attention to Detail™.

• SoffSeal’s fit and look are the absolute best. When you install SoffSeal weatherstripping, you are installing quality.