Tools & Supplies

Use the check list below for tools and supplies that may be used for your SoffSeal™ brand weatherstrip installation.  Most of these items can be found in your garage or workshop.

q Pliers

q Phillips screwdriver

q Flat tip screwdriver

q Side cutters

q Hammer and dolly, for A-Arm staples only

q Razor blade or sharp knife

q Door handle removal tool

q Door panel removal tool

q Scraper, metal or plastic

q Squeegee, plastic or hard rubber

q Wire brush

q Heat gun or hair dryer

q Spray bottle of water or glass cleaner

q Weatherstrip adhesive—we recommend 3M brand #3M8008

q Weatherstrip adhesive release agent—we recommend 3M brand #3M8971

q Weatherstrip adhesive solvent

q Factory assembly manual for your specific vehicle

PLEASE NOTE: These instructions are written for weatherstrip replacement and are for typical installations. Some cars or trucks may require slightly different steps. If you need assistance or have questions, please call our toll free technical hotline at 1-800-426-0902.