Hood Insulation

Hood insulation has two very important jobs to fulfill on your car.  It muffles harsh engine noises and enhances the new car look of your engine compartment when the hood is raised.

1) Your SoffSeal hood insulation kit comes complete with reproduction plastic retainer clips (for most models). Some models have no clips and must be glued. Check before you start.

2) NOTE: the side with the mottled appearance faces outs and should show once installed. The darker solid black side is the back side.

3) Start at one outer corner. The pre-punched holes line up with the holes in the hood. Put retainer anchor end through insulation hole and line up.

4) Then, use thumb pressure to anchor the pins in place.

5) Next, work your way toward the other corner, making sure all retainers are locked in place.

6) Be sure to locate all of the anchor pin holes. They are especially important in the middle of your hood.

7) Finished! Note the new factory appearance the SoffSeal hood insulation adds.